Tsunami Portable Pure-5TMM – Regenerative Desiccant Air Dryer with Tank & Pneumatic Drains, 5 HP / 15 CFM, 120V, PN: 21999-1100-MM
15 CFM Portable Regenerative Desiccant Air Dryer | For 5 HP Compressors | 1-Gallon Tank | Moisture Minder® Pneumatic Drains | Dew Points Down to -80°F | 120V
Short Product Description
The Tsunami Portable Pure-5TMM Regenerative Desiccant Air Dryer, PN 21999-1100-MM , delivers up to 15 CFM of clean, extremely dry compressed air in a portable package designed for approximately 5 HP compressor systems. Featuring integrated two-stage pre-filtration, twin regenerative desiccant towers, a 1-gallon storage tank , outlet regulator, carrying handle, and Moisture Minder® pneumatic drains , the Portable Pure-5TMM provides dew points down to -80°F for automotive finishing, painting, manufacturing, troubleshooting, and other moisture-sensitive compressed air applications.
Full Product Description
The Tsunami Portable Pure-5TMM Regenerative Desiccant Air Dryer combines Tsunami's Pure Series twin-tower drying technology with a portable frame, integrated 1-gallon storage tank, and Moisture Minder® pneumatic condensate drains .
Rated for up to 15 CFM and designed for approximately 5 HP compressed air systems , PN 21999-1100-MM provides a complete portable compressed air treatment package for applications that require exceptionally clean, dry air but do not justify or allow a permanently installed dryer.
The Portable Pure-5TMM is particularly useful for automotive refinishing, professional painting, temporary production equipment, equipment demonstrations, compressed air troubleshooting, mobile service applications, woodworking finishes, and other processes where moisture can compromise equipment performance or product quality.
Before compressed air reaches the regenerative dryer, it passes through Tsunami's integrated two-stage pre-filtration:
- First Stage Water Separator: Removes liquid water and particulate contamination down to 10 micron.
- Second Stage Oil Coalescing Filter: Removes bulk oils and aerosols while filtering fine particulate contamination down to 0.01 micron.
After pre-filtration, compressed air enters the twin regenerative desiccant towers. One tower removes water vapor from the compressed air while the second tower regenerates using a small amount of previously dried sweep air.
Approximately every two minutes, the dryer automatically switches between towers. This allows the molecular sieve desiccant to continuously regenerate while providing a steady supply of exceptionally dry compressed air.
The Pure-5 regenerative drying system consumes approximately 1 CFM of compressed air during regeneration and can provide dew points down to -80°F and relative humidity levels down to approximately 0.01% RH under proper operating conditions.
The Portable Pure-5TMM also incorporates a 1-gallon storage tank designed to help maximize laminar airflow during regeneration cycles. An outlet regulator provides control of downstream pressure, while the integrated carrying handle allows the complete system to be transported between applications.
What separates PN 21999-1100-MM from the standard Portable Pure-5T is its Moisture Minder® pneumatic drain system . These drains use an intermittent pneumatic pilot signal to automatically discharge collected condensate without requiring electrical power at the drain valves.
Key Features
- 15 CFM maximum air flow
- Designed for approximately 5 HP compressed air systems
- Portable regenerative desiccant dryer
- Moisture Minder® pneumatic drains
- Pneumatic drains require no electrical power at the drain valve
- Designed for automatic condensate removal with minimal compressed air loss
- Integrated carrying handle
- 1-gallon storage tank
- Outlet pressure regulator
- Twin-tower regenerative desiccant drying technology
- Dew points down to -80°F
- Relative humidity down to approximately 0.01% RH
- Molecular sieve desiccant
- One tower dries while the other regenerates
- Approximately 2-minute regeneration cycle
- 120-second tower drying time
- Approximately 1 CFM regeneration air consumption
- Integrated two-stage pre-filtration
- First-stage water separator
- Second-stage oil coalescing filter
- Removes liquid water
- Removes bulk oils and aerosols
- Filters particulate down to 0.01 micron
- Solenoid valve timer
- Purge exhaust mufflers
- 120V dryer power
- Maximum operating pressure of 175 PSI
- Maximum inlet temperature of 150°F
- Compact portable configuration
- Few moving parts for simplified maintenance
Benefits
Portable Extremely Dry Compressed Air
The Portable Pure-5TMM provides regenerative desiccant drying performance in a package that can be moved between compressed air systems, work areas, or pieces of equipment.
Instead of permanently installing a dryer in one location, the complete air treatment package can travel wherever extremely dry compressed air is required.
Dew Points Down to -80°F
Tsunami's Pure Series regenerative drying technology can provide dew points down to -80°F under proper operating conditions.
This makes the Portable Pure-5TMM suitable for applications requiring considerably drier air than a conventional refrigerated compressed air dryer can typically provide.
Moisture Minder® Pneumatic Drains
The 21999-1100-MM is equipped with Tsunami Moisture Minder® pneumatic drains rather than standard float drains.
The pneumatic drains use a pilot air signal to automatically discharge collected condensate. They do not require electrical power at the drain valve and are designed to minimize compressed air loss during drainage.
Complete Air Treatment Package
The Portable Pure-5TMM combines:
- Water separation
- Oil coalescing filtration
- Fine particulate filtration
- Twin-tower regenerative drying
- Automatic pneumatic condensate drainage
- 1-gallon air storage
- Outlet pressure regulation
into one portable compressed air treatment system.
Integrated 1-Gallon Storage Tank
The included 1-gallon tank helps maximize laminar airflow as the regenerative dryer alternates between towers.
The tank is part of the drying system and is not intended to replace the compressor's primary compressed air receiver.
Continuous Twin-Tower Regeneration
One molecular sieve desiccant tower actively dries the compressed air while the second tower regenerates.
Approximately every two minutes, the dryer automatically switches towers, providing continuous drying without requiring routine manual desiccant regeneration.
Protects the Desiccant
Liquid water, compressor oil, and particulate contamination can reduce desiccant performance and service life.
The integrated water separator and oil coalescing filter remove these contaminants before they reach the regenerative drying towers.
Easy to Move Between Applications
The portable frame and integrated carrying handle allow the complete dryer package to be moved between different work areas, equipment, or compressed air sources.
Ideal for Troubleshooting Air Quality Problems
The Portable Pure-5TMM can be temporarily connected to compressed air equipment to help determine whether moisture or contamination is contributing to paint defects, pneumatic equipment problems, or production issues.
Best For
The Tsunami Portable Pure-5TMM is an excellent choice for:
- Automotive painting and refinishing
- Collision and body shops
- Paint spray guns
- Professional coating applications
- Temporary spray booth applications
- Woodworking and finishing
- Mobile repair operations
- Compressed air troubleshooting
- Air quality testing
- Equipment demonstrations
- Temporary production equipment
- Pneumatic instrumentation
- Moisture-sensitive pneumatic tools
- Small manufacturing equipment
- Multiple work areas requiring dry air
- Approximately 5 HP compressor systems
- Applications requiring extremely low dew points
- Applications where pneumatic condensate drainage is preferred
Technical Specifications
| Specification | PN 21999-1100-MM |
|---|---|
| Series | Tsunami Portable Pure-5TMM |
| Maximum Air Flow | 15 CFM |
| Compressor Size | Approx. 5 HP |
| Dryer Type | Regenerative Desiccant |
| Configuration | Portable |
| Number of Towers | 2 |
| Tank Capacity | 1 Gallon |
| Outlet Regulator | Included |
| Carrying Handle | Included |
| Dryer Power | 120V |
| Drain Type | Moisture Minder® Pneumatic |
| Inlet Connection | 1/4" NPT |
| Outlet Connection | 1/2" NPT |
| Maximum Pressure | 175 PSI |
| Maximum Inlet Temperature | 150°F |
| Minimum Inlet Pressure | 80 PSI |
| Minimum Dew Point | Down to -80°F |
| Regeneration Air Consumption | Approx. 1 CFM |
| Cycle Time | Approx. 2 Minutes |
| Tower Drying Time | 120 Seconds |
| Towers Drying | 1 |
| Towers Regenerating | 1 |
| Weight | 51 lbs |
| Dimensions (H × W × D) | 23" × 25" × 12" |
Integrated Two-Stage Pre-Filtration
The Portable Pure-5TMM includes Tsunami two-stage pre-filtration before the regenerative dryer.
Stage 1 – Water Separator
- Removes liquid water
- Filters particulate down to 10 micron
- Moisture Minder® pneumatic condensate drain
- Water Separator: PN 21999-0390
- Replacement Element: PN 21999-0846
Stage 2 – Oil Coalescing Filter
- Removes bulk oils and aerosols
- Filters fine particulate down to 0.01 micron
- Moisture Minder® pneumatic condensate drain
- Oil Coalescing Filter: PN 21999-0390-Z-FD
- Replacement Element: PN 21999-0394
Proper pre-filtration is especially important with regenerative desiccant dryers because liquid water, compressor oil, and particulate contamination can contaminate molecular sieve desiccant and reduce drying performance.
How the Tsunami Portable Pure-5TMM Works
Compressed air first enters the integrated water separator , where liquid water and larger particulate contamination are removed.
The air then passes through the oil coalescing filter , which removes bulk compressor oil, aerosols, and fine particulate contamination.
The Moisture Minder® pneumatic drains automatically remove collected condensate from the pre-filtration system using a pneumatic pilot signal.
Once filtered, compressed air enters the regenerative desiccant dryer.
The Portable Pure-5TMM contains two molecular sieve desiccant towers :
- One tower actively removes water vapor from the compressed air.
- The second tower uses approximately 1 CFM of dry sweep air to regenerate its desiccant.
- Each tower dries for approximately 120 seconds .
- Approximately every two minutes, the dryer automatically switches between towers.
- The regenerated tower begins drying while the previously active tower begins regeneration.
The integrated 1-gallon tank helps smooth airflow through the system during these regeneration cycles.
How the Moisture Minder® Pneumatic Drains Work
The 21999-1100-MM replaces conventional float drains with Tsunami Moisture Minder® pneumatic drain valves.
The drain uses an intermittent pneumatic pilot signal to control condensate discharge.
During operation:
- Condensate collects within the drain.
- A pneumatic pilot signal actuates the internal piston.
- Condensate is moved into the pressurized discharge reservoir.
- When the pilot signal is relieved, the drain port opens.
- The stored condensate is automatically discharged.
The design requires no electrical power at the drain valve and minimizes the loss of compressed air during condensate removal.
Why Choose Pneumatic Drains?
Condensate drainage is critical to maintaining compressed air filtration performance.
If water and contamination are allowed to accumulate in the pre-filters, filtration efficiency can decrease and downstream equipment may be exposed to moisture and contamination.
Tsunami's Moisture Minder® pneumatic drain system provides several advantages:
- Automatic condensate removal
- No electrical power required at the drain valve
- Minimal compressed air loss
- Simple pneumatic operation
- Reliable condensate management
- Helps protect downstream filters and dryer components
For applications where dependable automatic drainage is a priority, the 21999-1100-MM provides an upgrade over the standard float-drain Portable Pure-5T.
Why Does the Portable Pure-5TMM Have a 1-Gallon Tank?
The integrated 1-gallon storage tank is part of Tsunami's Pure-5T regenerative dryer design.
The tank is designed to help maximize laminar airflow during regeneration cycles as the dryer switches between its two desiccant towers.
This small receiver is dedicated to dryer operation and should not be considered a replacement for the compressor's main air receiver.
Portable Pure-5T vs. Portable Pure-5TMM
Both portable models provide the same 15 CFM regenerative drying capacity, 1-gallon storage tank, 120V operation, and portable configuration .
The primary difference is the condensate drain system.
Portable Pure-5T – PN 21999-1100
- 15 CFM
- 5 HP compressor sizing
- 120V
- 1-gallon tank
- Portable carrying handle
- Standard float drains
Portable Pure-5TMM – PN 21999-1100-MM
- 15 CFM
- 5 HP compressor sizing
- 120V
- 1-gallon tank
- Portable carrying handle
- Moisture Minder® pneumatic drains
Choose the 21999-1100-MM when pneumatic condensate management is preferred.
Important Sizing Information
The Portable Pure-5TMM is rated for a maximum airflow of 15 CFM and is intended for approximately 5 HP compressed air systems .
Tsunami's published Pure Series flow ratings are based on operating conditions of approximately:
- 100°F inlet air temperature
- 175 PSI inlet pressure
- 100 PSI outlet pressure
- 80 PSI minimum inlet pressure
Lower inlet pressure and higher inlet temperatures can reduce dryer performance and downstream air quality.
The Pure-5 drying system also consumes approximately 1 CFM of compressed air during regeneration , which should be considered when determining available compressor capacity.
For best dryer performance, sizing should be based on:
- Actual compressed air demand in CFM
- Operating pressure
- Inlet air temperature
- Available compressor capacity
- Required downstream dew point
Compressor horsepower should be considered a general sizing reference rather than the only sizing factor.
Why Choose the Tsunami Portable Pure-5TMM?
The Tsunami Portable Pure-5TMM is designed for applications that need extremely dry compressed air along with the flexibility of a portable system and dependable pneumatic condensate management.
The 21999-1100-MM combines:
- Two-stage pre-filtration
- Moisture Minder® pneumatic drains
- Twin regenerative desiccant towers
- Automatic desiccant regeneration
- 1-gallon storage tank
- Outlet pressure regulator
- Portable carrying handle
into one complete air treatment package.
For shops, service operations, finishing applications, and production environments requiring up to 15 CFM of exceptionally dry compressed air , the Portable Pure-5TMM provides a versatile alternative to permanently mounted regenerative dryers.
Why Buy from Compressed Air Advisors Online?
Compressed Air Advisors Online specializes in compressed air equipment, filtration, drainage, and air treatment systems. Proper sizing is especially important with regenerative desiccant dryers because airflow, pressure, inlet temperature, regeneration-air requirements, and required dew point all affect dryer performance.
If you are unsure whether the Tsunami Portable Pure-5TMM is the correct dryer for your compressor or application, contact our compressed air specialists. We can help determine whether a portable, wall-mounted, tank-mounted, or larger regenerative dryer is the right solution for your compressed air system.
Frequently Asked Questions
How much air can the Tsunami Portable Pure-5TMM handle?
The Tsunami Portable Pure-5TMM, PN 21999-1100-MM , is rated for up to 15 CFM and is designed for approximately 5 HP compressor systems .
What dew point can the Portable Pure-5TMM achieve?
Tsunami states that the Pure-5 regenerative drying system can provide dew points down to -80°F under proper operating conditions.
What is the difference between 21999-1100 and 21999-1100-MM?
Both models are portable 15 CFM Pure-5T regenerative dryers with a 1-gallon tank.
PN 21999-1100 uses standard float drains.
PN 21999-1100-MM uses Tsunami Moisture Minder® pneumatic drains.
What are Moisture Minder® pneumatic drains?
Moisture Minder® drains use a pneumatic pilot signal to automatically discharge condensate. They require no electrical power at the drain valve and are designed to minimize compressed air loss during drainage.
Does the Portable Pure-5TMM include a tank?
Yes. PN 21999-1100-MM includes an integrated 1-gallon storage tank .
What is the purpose of the 1-gallon tank?
The tank helps maximize laminar airflow during the regenerative dryer cycle as the system switches between its two desiccant towers.
Does the 1-gallon tank replace my compressor receiver?
No. The 1-gallon tank is part of the dryer system and is not intended to replace the compressor's primary compressed air receiver.
Does the Portable Pure-5TMM include pre-filtration?
Yes. It includes an integrated water separator and oil coalescing filter before the regenerative desiccant dryer.
How does the Portable Pure-5TMM regenerate its desiccant?
The dryer contains two desiccant towers. One tower dries compressed air while the second regenerates using dry sweep air. Approximately every two minutes, the dryer automatically switches between the two towers.
How much regeneration air does the Portable Pure-5TMM use?
The Pure-5 drying system consumes approximately 1 CFM of compressed air during regeneration.
Does PN 21999-1100-MM require electricity?
The dryer controls operate on 120V electrical power .
The Moisture Minder® drain valves themselves operate pneumatically and do not require electrical power at the drain.
What size connections are on the Portable Pure-5TMM?
The current Tsunami Pure-5 product listing specifies a 1/4" NPT inlet and 1/2" NPT outlet for the portable Pure-5TMM.
What is the maximum operating pressure?
The maximum operating pressure is 175 PSI .
What is the maximum inlet temperature?
The maximum published inlet air temperature is 150°F .
How much does the Portable Pure-5TMM weigh?
PN 21999-1100-MM weighs approximately 51 lbs .
What are the dimensions of PN 21999-1100-MM?
The current Tsunami listing specifies dimensions of approximately 23" H × 25" W × 12" D .
Is the Portable Pure-5TMM a refrigerated air dryer?
No. It is a twin-tower regenerative desiccant air dryer . Molecular sieve desiccant removes water vapor from the compressed air, allowing the system to achieve substantially lower dew points than a typical refrigerated air dryer.