Clean Resources Micro - Oil/Water Separator up to 50 CFM up to 125PSI
FREE SHIPPING
On All Orders Over $199.00
Satisfaction Guaranteed
Easy Exchanges & Returns
Secure checkout
Protected By SSL
Description
Clean Resources MICRO 50 Oil-Water Separator
Manufacturer Part Number: F10104
Handle condensate from a small compressor installation with the wall-mounted Clean Resources MICRO 50, part F10104. The compact assembly uses a replaceable spin-on treatment cartridge and factory-installed bracket for straightforward installation and service.
Key Features & Benefits
- Intended for small compressor systems, typically 5–15 HP.
- Factory-installed and plumbed wall bracket.
- Spin-on cartridge simplifies scheduled replacement.
- No priming required for the MICRO cartridge system.
- Replacement cartridge F10109 is available separately.
Technical Specifications
| Manufacturer | Clean Resources |
|---|---|
| Manufacturer part number | F10104 |
| Model | MICRO 50 |
| Complete-system part number | F10104 |
| Replacement cartridge | F10109 |
| Nominal model capacity | 50 CFM; confirm application and service life |
| Typical compressor range | 5–15 HP |
| Treatment pressure | Up to 125 psi; higher inlet pressures require appropriate regulation |
| Dimensions | 12 in W × 5 in D × 19 in H |
| Published weight | 3 lb |
| Mounting | Wall mount |
What's Included
- MICRO 50 treatment cartridge
- Factory-installed and plumbed wall bracket and head assembly
Installation & Maintenance
Mount the assembly to a secure fixture, attach the cartridge and condensate line, and route the outlet to the drain according to the MICRO instructions. No priming is required. Confirm the supplied regulator arrangement and reduce pressures above the treatment rating as directed. Cartridge life depends on compressor size, runtime, and oil carryover.
Compatible Accessories & Related Products
- MICRO 50 Replacement Cartridge — F10109 — MICRO 50 replacement cartridge.
Browse our Clean Resources oil-water separators for related condensate-management equipment.
Frequently Asked Questions
Which replacement cartridge do I need?
Use F10109 for the MICRO 50. The MICRO 100 uses the different F10106 replacement kit.
Is the mounting bracket included?
Yes. The complete MICRO system includes a factory-installed and plumbed wall bracket.
Does the MICRO need priming?
No. The manufacturer states that priming is not required for the MICRO cartridge system.
Can I connect a 175-psi condensate source directly?
Confirm the unit's supplied regulator configuration. The treatment system is rated to 125 psi; higher source pressure must be reduced using the appropriate arrangement.
Will it work for my 15-HP compressor?
The manufacturer includes 15 HP in the typical MICRO 50 application range, but cartridge service life changes with loading and runtime. Confirm sizing for your compressor type and oil carryover.
Is this an inline compressed-air filter?
No. It treats collected liquid condensate from compressor-system drains; it is not installed as an inline air-treatment filter.
How often does the cartridge need changing?
Use the manufacturer's service-life guidance for the compressor size, runtime, and oil carryover. There is no single replacement interval for every installation.
Can I replace the cartridge without buying a new system?
Yes. Order F10109 and retain serviceable wall-mount and head components.
Why Buy from Compressed Air Advisors Online?
Get help matching the correct separator, replacement part, or installation accessory to your compressed air system. Call 877.247.2381 for product selection and application support, with nationwide delivery available.
