Saylor-Beall Performance Package 30 HP Air Compressor – Model 93024-FP 101.1 CFM @ 175 PSI
FREE SHIPPING
On All Orders Over $199.00
Satisfaction Guaranteed
Easy Exchanges & Returns
Secure checkout
Protected By SSL
Description
Saylor-Beall 93024-FP — 30 HP, 240-Gallon Horizontal Air Compressor
101.1 CFM at 175 PSI. American-made construction. Your choice of splash or pressure lubrication.
The Saylor-Beall 93024-FP Performance Package combines a 30 HP, two-stage reciprocating compressor with a 240-gallon horizontal tank and factory package features that support cooling, condensate removal, and equipment protection. It is a practical choice for automotive service, maintenance shops, and manufacturing applications with compatible airflow requirements.
Choose standard splash lubrication for general shop service, or upgrade to pressure lubrication for demanding operating conditions. Both configurations deliver 101.1 CFM at 175 PSI.
Key Features & Benefits
- 101.1 CFM at 175 PSI — Air delivery for compatible shop and industrial pneumatic equipment.
- 30 HP two-stage compressor — Saylor-Beall 9000 pump with standard splash lubrication or optional PL-9000 pressure lubrication.
- 240-gallon horizontal tank — Horizontal receiver configuration for industrial installations.
- Air-cooled aftercooler — Reduces discharge-air temperature and helps moisture condense for removal.
- Low oil control switch — Helps protect the compressor pump against damage caused by inadequate lubrication.
- Electric automatic tank drain — Automatically removes accumulated tank condensate.
- Magnetic starter — Provides motor overload protection.
- Quiet intake filter and vibration isolator pads — Help reduce intake noise and transmitted vibration.
- Crankcase breather — Vents crankcase pulsation while retaining oil mist.
- American manufacturing — Machined, assembled, and tested in St. Johns, Michigan.
- Dual control included — Select start/stop or continuous-run control using head unloaders.
Available Lubrication Options
| Configuration | Lubrication System | Selection Guidance |
|---|---|---|
| Standard — Splash Lubricated | 9000 pump with splash lubrication | General shop and industrial service within the compressor's operating limits. |
| Optional — Pressure Lubricated | PL-9000 pump with a gear-type rotary oil pump and drilled crankshaft and connecting rods | Consider for high-temperature environments and higher duty-cycle industrial service. |
The pressure-lubricated system delivers pressurized oil to the crankshaft, connecting rods, and piston pins. Pressure lubrication is an optional upgrade; it is not included with the standard splash-lubricated configuration. Select your lubrication choice along with the correct voltage and phase.
Technical Specifications
| Model / Package | 93024-FP / Performance Package |
|---|---|
| Horsepower | 30 HP |
| Compressor Type | Two-stage reciprocating; oil lubricated |
| Delivered Airflow | 101.1 CFM at 175 PSI |
| Standard Pump | 9000 — splash lubricated |
| Optional Pump | PL-9000 — pressure lubricated |
| Tank | 240-gallon horizontal |
| Electrical Choices | 208V / 3 phase; 230V / 3 phase; 460V / 3 phase |
| Published Package Dimensions (L × W × H) | 85" × 30" × 63" |
| Published Approximate Shipping Weight | 1893 lb |
| Manufacturing Location | St. Johns, Michigan, USA |
Dimensions and shipping weight are the published Performance Package values. Confirm final dimensions and weight for the selected electrical and lubrication configuration before planning installation or unloading.
Ideal Applications
- Automotive service and repair shops
- Industrial maintenance departments
- Fabrication and machine shops
- Woodworking and production shops with compatible air demand
Size the compressor for the combined airflow demand of your equipment and the required operating cycle. Contact us if your application involves sustained demand or unusually hot operating conditions.
Installation & Maintenance
Confirm voltage and phase before ordering. Install the compressor in a suitable, ventilated location with access for service, following Saylor-Beall's installation instructions. Check lubricant levels, service the intake filter, maintain the automatic drain, and follow the manufacturer's prescribed maintenance schedule.
Complete Your Air System
The included aftercooler and tank drain help manage heat and condensate. For applications requiring drier air, pair the compressor with a refrigerated air dryer and appropriate filtration, sold separately. Dryer selection must account for airflow, pressure, inlet temperature, and ambient conditions.
What's Included
- Selected 30 HP compressor configuration with a 240-gallon horizontal tank
- 9000 splash-lubricated pump, or PL-9000 pump when the pressure-lubricated option is selected
- Performance Package air-cooled aftercooler, low oil control switch, magnetic starter, quiet intake filter, crankcase breather, vibration isolator pads, electric automatic tank drain, and dual control
Air dryers, downstream filtration, piping, and installation materials are sold separately.
Warranty & Lead Time
One-year limited manufacturer warranty under Saylor-Beall's published terms. Electric motors are covered by their original manufacturer's warranty. Proper installation, lubrication, and maintenance are required; terms and exclusions apply.
Contact us for current factory availability, configuration-specific lead time, and delivery requirements.
Why Buy From Compressed Air Advisors Online?
Get expert help matching airflow, electrical requirements, lubrication, and air treatment to your application. We can help you compare Saylor-Beall air compressors and choose a system that fits your shop.
Need help selecting your configuration? Call 877.247.2381.
Frequently Asked Questions
What is the difference between splash and pressure lubrication?
Splash lubrication distributes oil through movement inside the crankcase. The optional pressure-lubricated system uses a gear-type oil pump and drilled crankshaft and connecting rods to deliver pressurized oil to the crankshaft, connecting rods, and piston pins.
When should I choose pressure lubrication?
Consider the pressure-lubricated option for demanding industrial service, high-temperature environments, or higher duty-cycle applications. Contact us to confirm the compressor is suitable for your required operating cycle.
Does pressure lubrication increase airflow?
No. Both lubrication configurations deliver 101.1 CFM at 175 PSI. Select pressure lubrication for its lubrication system rather than additional airflow.
Which electrical options are available?
The listing offers 208V, 230V, and 460V three-phase configurations. Select the correct voltage and phase for your facility before ordering.
Does the Performance Package include an air dryer?
No. It includes an air-cooled aftercooler and an automatic tank drain. For lower moisture levels downstream, add a properly sized air dryer and filtration.
Does this 30 HP model include dual control?
Yes. Dual control is standard on this 30 HP Performance Package and allows start/stop or continuous-run control through head unloaders. Confirm the required operating cycle with us.
Is this compressor made in the USA?
Yes. Saylor-Beall compressors are machined, assembled, and tested at the manufacturer's plant in St. Johns, Michigan.
What do I need to confirm before ordering?
Confirm airflow demand, operating cycle, voltage, phase, lubrication choice, installation space, and delivery access. Contact Compressed Air Advisors Online for configuration assistance and current lead time.