Tsunami Pure-5 High Temp Dryer, 15 CFM | 21999-1255
Lead Time: 1-2 Weeks
FREE SHIPPING
On All Orders Over $199.00
Satisfaction Guaranteed
Easy Exchanges & Returns
Secure checkout
Protected By SSL
MON-FRI, 8AM - 5PM CST
Lead Time: 1-2 Weeks
On All Orders Over $199.00
Easy Exchanges & Returns
Protected By SSL
The Tsunami High Temperature Pure-5, part number 21999-1255, is a complete 15 CFM compressed air treatment package for applications where hot compressor discharge needs to be cooled, filtered and dried before use. It combines a 50 CFM air-cooled aftercooler, two-stage prefiltration and a twin-tower regenerative desiccant dryer in a wall-mounted system.
Designed for approximately 5 HP compressor applications, this package accepts air up to 300°F at the aftercooler inlet and provides dew points down to -40°F under suitable operating conditions. It is a useful choice for spray foam trailers, mobile refinishing equipment and small shops that need very dry air while keeping floor space available.
Cooling comes first: the aftercooler lowers the compressed air temperature, causing water vapor to condense. The water separator and coalescing filter remove liquid contamination before the air reaches the desiccant. This reduces the moisture and oil load on the towers and helps protect downstream air tools and moisture-sensitive processes.
| Manufacturer / Model | Tsunami High Temperature Pure-5 |
|---|---|
| Manufacturer Part Number | 21999-1255 |
| Rated Airflow | 15 CFM |
| Compressor Size Reference | 5 HP; confirm actual airflow before selecting |
| Maximum Package Inlet Temperature | 300°F at aftercooler inlet |
| Maximum Operating Pressure | 175 PSI |
| Inlet Connection | 3/4" NPT |
| Outlet Connection | 1/2" NPT |
| Electrical Supply | 120 VAC; two power cords |
| Aftercooler Capacity | 50 CFM; complete package is limited to the dryer rating |
| Dew Point Capability | Down to -40°F under suitable operating conditions |
| Regeneration Air Consumption | Approximately 1 CFM |
| Tower Arrangement | Two towers: one drying, one regenerating |
| Tower Switching | Approximately every two minutes |
| Condensate Drains | Automatic float drains on prefilters |
| Package Weight | 83 lb |
| Dimensions | 22 × 38 × 13 in |
Hot air carries a high water-vapor load. Sending it directly into a desiccant dryer can reduce drying performance. This package handles the treatment in the proper order: cooling, liquid-water and oil removal, then water-vapor removal. The matched components simplify selection when your installation needs all three stages.
The regenerative stage is useful when an ordinary refrigerated dryer’s moisture level is insufficient for the process. Refrigerated drying remains a practical option for many general shop applications. Choose this package when the application calls for a lower dew point, hot incoming air treatment and a compact wall-mounted arrangement.
Regeneration uses part of the compressed air supply. Include approximately 1 CFM of regeneration air in your compressor capacity planning, along with your application demand. Dryer selection should account for the lowest operating pressure and hottest expected conditions.
Select by required airflow and operating conditions, not horsepower alone. The 5 HP reference is a starting point; actual compressor output and downstream demand must be checked against the 15 CFM system rating. The 50 CFM aftercooler does not increase this package’s dryer capacity.
Install the aftercooler upstream of the prefilters and regenerative dryer. Provide unobstructed cooling airflow, appropriate electrical power and a wall capable of supporting the package. Wall fasteners must be selected for the mounting surface and are not included. The supplied connection hose is intended for the parallel-to-wall aftercooler orientation described in the manual; other arrangements may require installer-supplied plumbing.
Tsunami specifies six-month coalescing-element replacement and inspection and lubrication of the dryer pistons and bores. The manual calls for desiccant-tower and piston replacement at three years. Monitor condensate drains and service the equipment according to its operating conditions. Disconnect power and relieve all pressure before maintenance.
Replacement parts are sold separately. Match the part number to the package and the component being serviced.
| 21999-0846 | Water separator service kit |
|---|---|
| 21999-0394 | Oil coalescing filter service kit; six-month element service |
| 21999-0976 | Replacement desiccant tower; two required for a complete dryer |
| 21999-0868 | Replacement automatic float drains; three-pack |
| 21999-0707 | Dryer piston replacement kit |
| 21999-0941 | Replacement timer valve assembly |
Free standard shipping on eligible domestic orders of $199 or more. Contact Compressed Air Advisors for current availability, lead time and destination-specific shipping requirements.
The complete package is rated for up to 300°F at the aftercooler inlet. Air must pass through the aftercooler and prefilters before entering the regenerative drying stage. The rating does not mean hot air should bypass the aftercooler.
The package includes the aftercooler, regenerative dryer, water separator, oil coalescing filter, automatic drains, purge exhaust mufflers, solenoid timer and wall brackets. Review the installation manual for the supplied connecting hardware and the mounting fasteners and plumbing your installation requires.
Yes. Both the aftercooler and dryer require 120 VAC power. The package has two power cords.
Yes. The towers regenerate using dry sweep air. The published approximate regeneration consumption for this model is 1 CFM, which needs to be considered when sizing the air supply.
Dew point depends on airflow, inlet pressure, air temperature and moisture loading. The published capability assumes suitable operating conditions. Contact us to check the dryer against your actual installation requirements.
Use water separator service kit 21999-0846 and oil coalescing service kit 21999-0394. The service-parts table above also links the desiccant towers, float drains, piston kit and timer assembly.
Browse our Tsunami Parts collection for replacement components. For help selecting a dryer or service part, call 877.247.2381.