Clean Resources - IDC-350 CFM Oil/Water Separator System
Lead Time: In Stock
On All Orders Over $149.00
Easy Exchanges & Returns
Protected By SSL
The IDC-350 oil/water separator system allows smaller industry compressors the ability to easily maintain EPA compliance. Like the other units in the IDC series; 350 units have an improved alumina silicate substrate media bed that prolongs the life of the unit and an internal decompression chamber. All you have to do is prime the unit and run your condensate lines to the unit with no need to purchase or install a separate decompression chamber.
As with all Clean Resources products the IDC-350 oil/water separator system is designed to handle all compressor lubricants without regard to specific gravity, emulsification, or relative humidity. The IDC-350 is GUARANTEED to clean compressor condensate to less than 10ppm for the life of the unit or we will provide a refund through your distributor.
IDC-350 oil/water separator systems provide an easy, convenient and cost effective method to keep your compressor room EPA compliant. The IDC-350 requires no electricity, is maintenance free, requires no pump and is not susceptible to mold growth. All IDC-350 units can be disposed of as non-hazardous special waste provided the liquid has been drained. Should your landfill not accept the spent unit, it can be returned to one of our sites. Simply fill out the disposal form at www.recycleoilsep.com and follow the instructions.
Our 100% Guarantee
When properly sized and installed, the MINI is guaranteed to reduce the contaminants in your compressor condensate to less than 10 ppm for the life of the unit. In the event of failure under these conditions, Clean Resources, Inc. will replace the failed unit or provide a refund via your distributor.
How It Works
Laboratory tested and proven in the field, the MINI is engineered to provide EPA compliant results. It is changing the world of compressor condensate management. Once the condensate from the waste stream is piped into the unit through the inlet hub, it comes into contact with our improved alumina silicate substrate media. These beds absorb the lubricant while repelling the water. The lubricant bonds with the media making the cleaned water easily disposable.
Works with these Lubricants
Diester-based lubricants, PAO-based lubricants, Glycol-based lubricants, Hydraulic lubricants, Food grade lubricant, Mineral-based lubricants
Androl, Ultra Chem, Summit, Royal Purple, All Gardner Denver Lubricants, All Kaeser Lubricants, All Quincy Lubricants, All Atlas Copco Lubricants, All Palatek Lubricants, All Compair Lubricants, All Ingersoll-Rand Lubricants,
All Sullair Lubricants except 24 KT*
*XKT Paks are available for silicone-based lubricants such as Sullair 24 KT fluid