Tsunami 20 CFM 2-Stage Membrane Dryer, 21999-0357
Lead Time: Generally Ships in 3-5 Days
FREE SHIPPING
On All Orders Over $199.00
Satisfaction Guaranteed
Easy Exchanges & Returns
Secure checkout
Protected By SSL
MON-FRI, 8AM - 5PM CST
Lead Time: Generally Ships in 3-5 Days
On All Orders Over $199.00
Easy Exchanges & Returns
Protected By SSL
Supply clean, dry air close to your equipment with the Tsunami 21999-0357 20 CFM membrane dryer. Included water separation and oil coalescing pre-filters remove bulk liquids, oil aerosols and fine particles before air reaches the drying membrane. An outlet regulator lets you set delivery pressure for the application.
This two-stage package needs no electrical supply. Automatic float drains discharge condensate collected in the pre-filters, making it useful where an electrical connection is inconvenient.
A membrane dryer is a practical choice when you need a compact supply of dry air at one machine or work area. Its strongest advantages are a simple drying mechanism, small installation footprint and the ability to treat a specific air branch to the dryness that application needs.
A refrigerated dryer is often the economical choice for general shop air and larger, steady airflow when an above-freezing pressure dew point meets the application. Choose membrane drying when a small point of use needs additional drying, installation space is tight or a refrigeration unit at that location is inconvenient. A properly sized membrane can also serve downstream of a central refrigerated dryer, with appropriate pre-filtration, to further dry a selected branch.
Compared with a regenerative desiccant dryer, a membrane drying core avoids alternating tower controls and desiccant-bed maintenance. Compared with a manual-change cartridge dryer such as CORE, it avoids routine replacement of a saturated desiccant cartridge. A regenerative desiccant system is often the better fit when continuous production requires a specified very low pressure dew point or substantially more airflow. A manual-change cartridge dryer can suit intermittent use when cartridge replacement is acceptable.
Membrane drying uses compressed air to remove moisture. Sweep-air consumption adds to compressor demand, so no electrical power at the drying core does not mean zero energy cost. Compare usable outlet flow, required dryness, hours of operation and maintenance costs. At larger or continuous loads, sweep-air cost can outweigh the installation advantages. Adequate water separation and coalescing filtration are essential to protect the fibers.
| Dryer type | When it makes sense | Operating consideration |
|---|---|---|
| Membrane | Compact point-of-use treatment; selected branches needing extra drying | Uses sweep air; outlet dryness depends on flow and inlet conditions |
| Refrigerated | General-purpose shop or central air when an above-freezing dew point is sufficient | Requires electrical power and refrigeration-system maintenance |
| Regenerative desiccant | Continuous duty with a specified low pressure dew point | Regeneration uses purge air and/or energy; valves and desiccant require service |
| Manual-change desiccant / CORE | Intermittent point-of-use work | Replace the cartridge as it becomes saturated |
Tell us the required pressure dew point, minimum downstream temperature, inlet pressure and actual tool airflow. We can help decide whether this membrane package, a refrigerated dryer or a desiccant system best matches your needs.
| Specification | Details |
|---|---|
| Part number | 21999-0357 |
| Rated maximum airflow | 20 CFM |
| Pre-filtration | 2 stages |
| Inlet / outlet connections | 1/2" NPT / 1/2" NPT |
| Maximum inlet air temperature | 100°F |
| Maximum operating pressure | 175 PSI |
| Sweep-air consumption | 3.3 CFM at 100 PSI |
| Condensate drain | Automatic float |
| Electrical supply | None |
| Dimensions (H x W x D) | 23" x 20" x 4-1/2" |
| Approximate weight | 16.5 lbs |
Select capacity for the required outlet dryness, inlet conditions and actual process demand. Allow for sweep-air consumption in compressor sizing. Airflow and operating conditions affect the achievable dew point.
Pre-filtered air passes through hollow fibers. Water vapor permeates the fiber walls, and a portion of dried air sweeps the collected moisture out through the vents. This sweep flow is normal during operation and may sound like a small air leak.
Select the service part for this dryer and its filter series. Parts are sold separately; filter service kits, element packs and the membrane core are different replacement items.
| Part number | Service item |
|---|---|
| 21999-0227 | Water separator service kit |
| 21999-0202 | Oil coalescing filter service kit |
| 21999-0825 | Oil coalescing replacement elements, five-pack |
| 21999-0355 | Replacement membrane dryer core |
| 21999-0871 | Replacement outlet regulator with gauge |
| 21999-0868 | Float drain replacement pack, three floats with O-rings |
Yes. Sweep air carries separated moisture out of the membrane housing. Include this demand when sizing your compressor and close the inlet valve when the dryer is not in use, following the operating instructions.
Two-stage models include water separation and oil coalescing filtration. Precision three-stage models add activated carbon filtration for oil vapor and use an electronic drain.
Yes. Call 877.247.2381 with your inlet pressure, temperature, required airflow and dryness target.
Download the membrane dryer installation and maintenance manual.