Tsunami CORE 25 CFM Desiccant Dryer, 21999-1225 / 21999-1235
FREE SHIPPING
On All Orders Over $199.00
Satisfaction Guaranteed
Easy Exchanges & Returns
Secure checkout
Protected By SSL
Description
Tsunami CORE 25 CFM Desiccant Dryer, 21999-1225 / 21999-1235
Keep moisture out of intermittent painting and coating work with the Tsunami CORE 25 CFM desiccant dryer. Its replaceable, dual-media cartridge captures water vapor close to the point of use. Choose a complete pre-filtration package or add the dryer to an air line that already has suitable water separation and oil coalescing filtration.
CORE is intended for intermittent, lower-pressure point-of-use applications, with a 25 CFM rating at the spray gun. It uses a manually replaced desiccant cartridge, so cartridge condition and upstream filtration are key to maintaining dry air.
Key Features and Benefits
- Dry air for finishing: Supports moisture-sensitive painting and coating applications; dew points down to -80°F depend on inlet conditions and cartridge condition.
- Dual-media cartridge: Helps reduce desiccant dusting and airflow channeling through the media.
- Visual moisture check: A color-changing indicator helps identify when cartridge service is needed.
- Compact wall-mounted design: An anodized housing and mounting bracket support installation near your work area.
- Choose your filtration package: Model 21999-1225 includes a water separator and oil coalescing pre-filter; model 21999-1235 uses suitable existing upstream filters.
Choose Your Configuration
| Part number | Pre-filtration | Dimensions (H x W x D) | Approx. weight |
|---|---|---|---|
| 21999-1225 | Included: water separator + oil coalescing filter | 22" x 13" x 7" | 25 lbs |
| 21999-1235 | Not included; suitable upstream pre-filtration required | 22" x 5" x 7" | 14 lbs |
Technical Specifications
| Specification | Details |
|---|---|
| Rated airflow | 25 CFM at the spray gun; intermittent use |
| Dryer type | Single-tower, manual-change desiccant cartridge |
| Inlet / outlet | 1/2" NPT / 1/2" NPT |
| Maximum operating pressure | 200 PSI |
| Maximum inlet air temperature | 150°F |
| Dryer bowl drain | Manual drain |
| Pre-filter drains, 21999-1225 | Automatic float drains |
| Minimum service clearance | 17" below the dryer for cartridge removal |
How the CORE Dryer Works
Filtered air enters the housing and travels down around the cartridge, then upward through the two layers of desiccant. The media adsorbs water vapor. Air passes through a 10-micron filter disk before leaving the dryer. On model 21999-1225, the upstream water separator and coalescing filter remove bulk liquids and fine contamination before the air reaches the cartridge.
Maintenance Parts and Replacement Elements
Both dryer configurations use the same CORE cartridge and dryer repair components. Pre-filter service parts below apply to the included filters on 21999-1225; match the parts to your own filters when using 21999-1235. Parts are sold separately.
| Part number | Service item |
|---|---|
| 21999-1230 | Desiccant cartridge; replace when moisture condition indicates |
| 21999-1146 | Moisture indicator; inspect monthly and replace annually |
| 21999-1124 | CORE dryer replacement end cap |
| 21999-1077-PL | CORE dryer replacement outer tube |
| Q215-5716 | Dryer head quad ring |
| 21999-0227 | Water separator service kit for the 21999-1225 pre-filter |
| 21999-0202 | Oil coalescing service kit for the 21999-1225 pre-filter |
| 21999-0825 | Coalescing replacement elements, five-pack, for compatible pre-filters |
| 21999-0868 | Pre-filter float drain replacement pack; three floats with O-rings |
Browse all Tsunami Parts for additional maintenance supplies.
Maintenance Schedule
- Monthly: Inspect the moisture indicator and replace the desiccant cartridge when indicated.
- Every six months: Replace the oil coalescing element in the pre-filter.
- Annually: Replace the moisture indicator, or sooner if it fails to recover after cartridge replacement.
- Check drain function regularly. Isolate the air supply and fully release pressure before opening the dryer or servicing filters.
Frequently Asked Questions
Do I need the model with pre-filters?
Choose 21999-1225 when you need the water separator and oil coalescing filter included. Choose 21999-1235 when equivalent upstream filtration is already installed. Protecting the desiccant from liquid water and oil helps preserve its useful service life.
When should I replace the cartridge?
Inspect the indicator monthly and replace the cartridge as indicated. Cartridge life varies with inlet moisture, temperature, airflow and frequency of use. Follow the indicator color guide and service instructions in the manual.
Will this handle continuous production airflow?
CORE is designed for intermittent point-of-use demand. For continuous production or larger air requirements, call us for help selecting the appropriate dryer.
Installation and Maintenance Manual
Download the CORE Series installation and maintenance manual.
For sizing or part-selection help, call Compressed Air Advisors Online at 877.247.2381.
