Clean Resources Auxiliary Discharge Pump System
Manufacturer Part Number: F10245
Move treated condensate to a remote or elevated drain with the Clean Resources F10245 auxiliary discharge pump. The separator gravity-feeds the pump's collection container, and the pump transfers the treated water onward when a direct downhill drain route is impractical.
Key Features & Benefits
- Supports remote or uphill discharge routes.
- Collection container receives treated water from the separator.
- Vertical flow switch controls pump operation.
Technical Specifications
| Manufacturer | Clean Resources |
|---|---|
| Manufacturer part number | F10245 |
| Motor | 1/3 HP |
| Current | 4 A |
| Switch type | Vertical flow switch |
| Container capacity | 15 gal |
| Discharge hose | 3/4 in diameter |
| Dimensions | 15 in W × 15 in D × 32 in H |
| Compatibility | Clean Resources CRP and IDC separators |
What's Included
- Auxiliary discharge pump and collection container assembly
Installation & Maintenance
The separator must gravity-feed the pump inlet. Place IDC-350 and CRP-500 through CRP-1000 units on a suitable stand with their outlet above the pump inlet and the hose running downhill. Verify the pump's electrical nameplate and the required lift and discharge route before installation.
Compatible Accessories & Related Products
- IDC-350 Oil-Water Separator — F10050
- CRP-500 Oil-Water Separator — F10501
- CRP-750 Oil-Water Separator — F10502
- CRP-1000 Oil-Water Separator — F10503
- CRP-1500 Oil-Water Separator — F10504
- CRP-2000 Oil-Water Separator — F10505
- Spill Containment Platform — A10737 — Collects incidental drips and spills.
Browse our Clean Resources oil-water separators for related condensate-management equipment.
Frequently Asked Questions
When is an auxiliary pump useful?
Use it when the final drain is too far away, uphill, or obstructed so the separator cannot discharge directly by gravity.
Can the pump pull water uphill out of the separator?
The separator must drain downhill into the pump container. The pump then transfers the collected water to the final drain.
Which separators need a stand?
Clean Resources specifies a stand for IDC-350 and CRP-500 through CRP-1000 installations using this pump.
Does the pump remove compressor oil?
No. It moves treated condensate after the oil-water separator; it does not replace condensate treatment.
What is the container capacity?
The published container capacity is 15 gallons.
Will it work for any lift height or distance?
Confirm the required lift, distance, and discharge conditions against the pump's performance data before ordering.
Why Buy from Compressed Air Advisors Online?
Get help matching the correct separator, replacement part, or installation accessory to your compressed air system. Call 877.247.2381 for product selection and application support, with nationwide delivery available.