America's Choice For Compressed Air Equipment Help
America's Choice For Compressed Air Equipment
Skip to content

Tsunami 21999-0177-230 Electronic Timer Drain, 230V

Original price $129.00
Original price $129.00 - Original price $129.00
Original price $129.00
Current price $117.00
$117.00 - $117.00
Current price $117.00
Save $12.00 Save $12.00
SKU 21999-0177-230

FREE SHIPPING

On All Orders Over $199.00

Satisfaction Guaranteed

Easy Exchanges & Returns

Secure checkout

Protected By SSL

Overview
Description

Tsunami 21999-0177-230 Moisture Minder Electronic Drain — 230 VAC

The Tsunami 21999-0177-230 Moisture Minder Electronic Drain automatically discharges condensate from compatible compressor tanks, filters, aftercoolers, dryers and drip legs. This version operates on 230 VAC / 60 Hz and uses a solid-state adjustable timer to control how long the solenoid opens and how much time passes between drain events.

An integrated strainer intercepts larger debris before it reaches the valve orifice. The built-in manual flush valve lets the operator clear collected contamination from the strainer path, helping reduce fouling of the valve mechanism. The timer’s test button supports routine operating checks.

Choose the correct voltage before ordering. This is a powered timer drain; it does not require an intermittent pneumatic pilot signal. It opens according to the timer setting rather than sensing liquid level, so adjust the cycle to the actual condensate load.

Key Features

Feature Benefit / Function
Adjustable Electronic Timer Controls discharge duration and time between drain events.
Test Button Provides an accessible way to check drain actuation.
Integrated Strainer Traps larger contaminants before they reach the orifice.
Manual Flush / Blowdown Valve Allows manual clearing of trapped material from the strainer path.
Stainless Internal Armature and Shaft Durable internal components for condensate-drain service.
Dual-Size Inlet 1/4-inch female NPT or 1/2-inch male NPT connection.
4 mm Internal Orifice Published valve-orifice size.
Optional Installation Kit Supports the remote mounting and tubing arrangement shown in the instructions.

Technical Specifications

Specification Value
Manufacturer Part Number 21999-0177-230
Drain Type Electronic timed-solenoid condensate drain
Electrical Supply 230 VAC / 60 Hz
Published Current Draw .08 amp
Maximum Working Pressure 230 PSI
Maximum Operating Temperature 175°F
Inlet Connection 1/4" NPT female / 1/2" NPT male
Discharge Connection 1/4" NPT
Internal Orifice 4 mm
Dimensions 5.5 × 3.5 × 3.5 in
Weight Approximately 1 lb
External Pneumatic Pilot Not required
Published Warranty 90 days, subject to manufacturer terms

Typical Applications

Use at compatible condensate collection points on receiver tanks, aftercoolers, dryers, filters and distribution-system drip legs. Removing accumulated liquid helps reduce water carryover into downstream equipment. Select the installation for the collection point, operating pressure, temperature, available electrical power and condensate load.

For direct installation on a 20 CFM Tsunami filter, the manufacturer’s instructions call for the appropriate 1/4-inch-to-1/8-inch reducer connection. Other filter or tank installations may need different fittings or tubing. Verify the installed ports before ordering adapters.

How to Set the Timer

ON time is the duration of each discharge. OFF time is the interval between openings. The installation manual recommends an initial ON time of approximately 0.5–2 seconds and an OFF interval of 5 minutes, followed by adjustment for the moisture load.

Check the actual discharge rather than treating the starting settings as correct for every system. Seasonal humidity and operating hours can change condensate production. An overly long ON time or unnecessarily short OFF interval can release compressed air after liquid has cleared; an interval that is too long can allow liquid to accumulate.

Strainer Flushing and Maintenance

Self-cleaning does not mean maintenance-free. The built-in flush feature is operated manually to clear accumulated contaminants from the strainer path. Inspect the strainer and discharge tubing, test actuation and follow the manufacturer’s cleaning procedure as conditions require.

Keep discharge and flush lines secured and directed to suitable condensate collection or treatment. Isolate and depressurize the system, and disconnect electrical power before disassembly or service. Check for leaks and correct operation before returning the drain to use.

Installation Kit and Voltage Selection

Item What to Order
21999-0316 Electronic Drain Installation Kit Optional installation hardware and tubing arrangement; drain valve sold separately.
21999-0177 — 115 VAC drain Match the drain’s electrical supply and nameplate to your installation.
21999-0177-230 — 230 VAC drain Match the drain’s electrical supply and nameplate to your installation.

The 21999-0316 kit is for electronic-drain installation. It is different from the pneumatic-drain installation kit. The manual shows mounting the electronic drain on a bracket, routing condensate to the inlet and routing discharge and flush tubing to collection.

Product Literature

Electronic Drain and Installation Kit Manual
Manufacturer Electronic Drain Specifications

Frequently Asked Questions

Does it need a pneumatic pilot signal?

No. This model uses its electrical timer and solenoid. A pneumatic piston drain is a different design and needs an intermittent air pilot.

Is it a zero-air-loss, level-sensing drain?

No. It opens at the programmed intervals. Set the timing to remove condensate without unnecessarily long air discharge.

Does the strainer flush itself automatically?

The flush valve is manually operated. Use the test and flush features and inspect the drain according to the installation instructions.

Is the installation kit included?

No. Order the 21999-0316 kit separately if its mounting and tubing arrangement suits your collection point.

Can I run this version on a different voltage?

Select the 230 VAC version only when it matches the required supply and nameplate. Choose the other listed AC version when that supply is needed; do not assume one model accepts both voltages.

Shipping and Expert Help

Contact us for current availability and lead time. Free standard shipping applies to eligible domestic orders of $199 or more.

Call 877.247.2381 with your collection point, supply voltage, pressure and temperature for help selecting the drain and fittings.

Reviews