America's Choice For Compressed Air Equipment Help
America's Choice For Compressed Air Equipment
Skip to content

Tsunami Pure-7 25 CFM Regenerative Dryer, 21999-1140

Original price $2,812.00
Original price $2,812.00 - Original price $3,222.00
Original price $2,812.00
Current price $2,531.00
$2,531.00 - $2,900.00
Current price $2,531.00
Save $322.00 Save $281.00
SKU 21999-1140

Lead Time:  

Generally Ships in 3-5 Days


Drain Type: Float

FREE SHIPPING

On All Orders Over $199.00

Satisfaction Guaranteed

Easy Exchanges & Returns

Secure checkout

Protected By SSL

Overview
Description

Tsunami Pure-7 25 CFM Regenerative Dryer, 21999-1140

Protect moisture-sensitive tools, equipment and finished work with the Tsunami Pure-7 25 CFM regenerative dryer. Included two-stage pre-filtration removes liquid water, oil aerosols and fine particulates before molecular sieve desiccant captures water vapor. The result is clean, very dry air for finishing, pneumatic equipment and industrial processes.

The wall-mounted layout keeps valuable floor space clear. A solenoid timer valve automatically directs the drying and regeneration sequence, providing straightforward operation with few moving parts.

Key Features and Benefits

  • Low moisture levels: Dew points down to -80°F and relative humidity down to 0.01% RH, depending on inlet conditions and sizing.
  • Two-stage pre-filtration: Water separation followed by oil coalescing filtration helps protect the downstream desiccant.
  • Automatic regeneration: Timer-controlled switching alternates tower banks between drying and regeneration.
  • Automatic drains: The selected float or pneumatic drain arrangement discharges collected condensate.
  • Serviceable design: Replaceable filter elements, towers, valves and piston components support scheduled maintenance.
  • One-year warranty: Manufacturer warranty terms and required maintenance apply.

Technical Specifications

Specification Details
Rated maximum airflow 25 CFM
Compressor sizing reference 7.5 HP; size by actual airflow and operating conditions
Configuration Wall mounted
Connections (NPT) 1/2" inlet / 1/2" outlet
Maximum operating pressure 175 PSI
Maximum inlet air temperature 150°F
Desiccant towers 2
Control Solenoid timer valve
Regeneration orifice .024 inch
Approximate regeneration-air consumption 1.25 CFM
Tower switching interval Approximately 2 minutes

Model and Installation Details

Part number Power Drain type Dimensions (H x W x D) Approx. weight
21999-1140 120 VAC Automatic float 26" x 25" x 8" 60 lbs
21999-1140-MM 120 VAC Moisture Minder pneumatic 29" x 25" x 8" 62 lbs

Flow capacity depends on inlet pressure, inlet temperature and downstream demand. Allow additional compressor capacity for regeneration air. A storage tank supports brief demand peaks but does not increase the dryer’s continuous CFM rating. Call 877.247.2381 for application sizing.

How the Dryer Works

Incoming air first passes through the water separator and oil coalescing pre-filter. Desiccant in the active tower bank captures water vapor, while a portion of dry air purges moisture from the regenerating bank. The solenoid timer valve switches the banks automatically. Regeneration uses compressed air, so include that demand when sizing your compressor.

Maintenance Parts and Replacement Elements

Use the parts below for your selected model. Parts are sold separately. This dryer has 2 desiccant towers; match service quantities and electrical components to your equipment.

Part number Service item
21999-0227 Water separator service kit
21999-0202 Oil coalescing filter service kit
21999-0825 Oil coalescing replacement elements, five-pack
21999-0349 Replacement desiccant tower, purple; sold individually
21999-0349-BK Replacement desiccant tower, black; sold individually
21999-0707 Piston replacement kit
21999-1149 Piston O-ring service kit for 12 pistons
21999-0650-24 Tower mounting stud / regeneration valve, .024-inch orifice
21999-0700 Replacement exhaust mufflers, two-pack
21999-0868 Replacement float drains with O-rings, three-pack
21999-0795 Moisture Minder pneumatic filter drain; requires pilot signal
21999-0941 Complete timer valve assembly for compatible 110/120V Pure dryers

Shop the Tsunami Parts collection for additional repair components and maintenance supplies.

Maintenance Schedule

  • Every six months: Replace the oil coalescing element and inspect/lubricate the pistons and piston bores as directed in the dryer manual.
  • Three-year service: Replace desiccant towers and pistons according to the model-specific instructions.
  • Inspect automatic drains and follow the service requirements for your operating conditions. Isolate power and release all system pressure before service.

Ideal Applications

Automotive and woodworking finishing, pneumatic tools and controls, manufacturing equipment and other moisture-sensitive compressed air applications. Select the dryer and filtration arrangement to meet the air-quality requirements of your process.

Frequently Asked Questions

Is a compressor included?

No. This is an air-treatment system supplied by an external compressor. The compressor must provide the required operating pressure and airflow, including regeneration demand.

What is the difference between float and pneumatic drains?

Float drains discharge condensate automatically as liquid collects. Moisture Minder pneumatic drains use a pilot signal from the dryer control to discharge condensate. Select the drain arrangement shown for the exact part number.

Which coalescing replacement should I order?

Use 21999-0202 for the compatible service kit or 21999-0825 for a five-pack of replacement elements. Match the complete part number to your pre-filter.

Can you help me size this dryer?

Yes. Call Compressed Air Advisors Online at 877.247.2381 with your compressor output, operating pressure, inlet temperature and application requirements.

Installation and Maintenance Manual

Download the Pure Series installation and maintenance manual. Match the instructions to your model and control voltage.

Instruction Manual Brochure Reviews